Shop Stamping and Tools!
Plus, Add 3 FREE Gifts to Your Cart! Details Here.
Plus, Add 3 FREE Gifts to Your Cart! Details Here.
$30.00 $15.99
This is no magic trick - but the results are so magical that you simply won't believe your eyes! The Original Magic Mat Cutting Pad from Scrapbook.com is going to change the way die cut on all your projects.
The Slim Magic Mat was designed to be used with the Scout die cutting machine in place of plate C. Two Slim Magic Mats may also be used to replace both C plates in your Scout die cutting sandwich.
The Slim Magic Mat is compatible with the following machines, however, the length and width of the Slim Magic Mat will likely be smaller or narrower than the platform or plate for these machines:
Please note the slim Magic Mat is NOT compatible with the Sizzix Sidekick or the Anna Griffin Empress Mini. The above list of machines have been tried and tested. Should you have questions about the compatibility of another machine, we encourage you to give it a try and see the results for yourself!
*Review product images for die cutting sandwiches using the Magic Mat with this machine. For more sandwich configurations and user tips, be sure to check out our Top Magic Mat Questions Answered video!
Contents: 1 slim Scrapbook.com Magic Mat Cutting Pad
Size: Cutting Pad measures 3.5" x 9" with a thickness of 3mm
What Is The Original Magic Mat?
Features:
Say goodbye to the typical cracking and etching you're used to in standard plastic cutting pads. With the Magic Mat, you won't have to worry about deep plastic cutting pad impressions getting transferred to your new project. And these are just a few of the many fabulous tricks up The Original Magic Mat's sleeves!
Tips For Using Your Scrapbook.com Magic Mat:
At Scrapbook.com, we prioritize your satisfaction. We genuinely care about your experience and strive to go above and beyond to ensure your happiness. From order to delivery, we pay attention to every detail for exceptional experiences and perfect condition upon delivery.
Number of pieces: 1
This is a Scrapbook.com exclusive product.
Please note The Magic Mat is not magnetic.
This mat is amazing. Actually, it’s better than amazing but I can’t find another adjective at the moment. My thinnest dies (Lawn Fawn box cards) do not come out with any signs of warping. And it’s so smooth going through my Vagabond. And it’s fantastic with one of my finely detailed die that I’ve tested.
I LOVE it when a new-to-market product exceeds my dreams. IF YOU ARE A DIE CUT MANIAC YOU MUST GET THIS!!
This review was written about a related product.
I thought I would give this try on my cuttlebug, Since the B plates are hard to come by now a days. This mat does cut well. But for the thin dies you want to cut. It seem to not have enough thickness unless you have couple piecs of paper or cardstock under the plate or mat to give it a little bit of more thickness to cut it.
This review was written about a related product.
Love the product. Works great in the Cuttlebug. Buying more for friends for gifts, since it's hard to get the acrylic plates. Besides, it's so nice to not have to use the acrylic plates that warp. Leave it to Scrapbook.com to come up with a solution to a problem! I'd highly recommend the plates and shopping at Scrapbook.com. A great place to buy your crafting needs! You might also want to consider making Cards for Kindness!
This review was written about a related product.
I am enjoying the magic mat. It's just not thick enough. In my Cuttlebug sandwich I am using the magic mat along with one of my plastic mats and a rubber mat and I'm not getting enough pressure, so I am also using a piece of thick paper to shim it and it cuts fine then. It's much better than those plastic plates.
This review was written about a related product.
Purchased last week. Spent 1 whole day "playing"! Used standard size Magic Mat with my Gemini Jr. Excellent results! I appreciated your video on the various "sandwiches" for die cutting machines. Very useful. A good rugged mat. I did as you suggested, regular bottom cutting plate, magic mat, material w/die cutting side down, 2nd cutting plate, & 1 piece of 100# CS. Trying to flip mats regularly. So far, all is good.
This review was written about a related product.
This is an amazing product. It will end the problem of the lower cutting matting ruining your paper with old cuts I've used mine everyday since I bought it. It's fantastic. It doesn't warp, doesn't show cuts and doesn't need shimming as often as using the plastic cutting pad. I highly recommend this product.
This review was written about a related product.
My prefer die-cutting machine is a Spellbinder's Platinum 6. It's about 4 years old and I use it daily. After a few tests with word dies and intricate Spellbinder's dies I fell in love. I do have a cardstock shim under the Magic Mat. It's just like anything else, it takes trial and error to get the kinks worked out. But man do I love not having any fuzzy pieces on my die cuts anymore. That's amazing! And the mat doesn't warp or buckle.
This review was written about a related product.
I’ve had my mats (bought 2 different sizes) for about a week. I LOVE THEM. I have a Big Shot and it fits perfectly for all the sizes if wafer thin dies I’ve used. Cuts like butter, and is so smooth and quiet. 💗
To prevent overuse of sections, I marked the edges so I remember to flip and turn it each use.
This review was written about a related product.
The only negative about this product is that it is entirely too long for the Big Shot Switch machine and I had to cut it down, but that's alright because now I have two mats!
This thing really is what it's name implies.. it's magic! It delivers crisp clean cuts and when it gets all misshapen from repeated runs through whatever machine you're using just run your heat tool over it for a few minutes and voila, good as new!
This review was written about a related product.
Works great. I have Bira 9 inch opening die cutter/embossing machine. The majic mat is about 1.5 inches longer then my thick platform so I overhang it on the insert end and make the back end all line up. Platform, a magnetic cutting mat, paper, die and magic mat on top. Sometimes I use the 2 magic mats one on the thick platform, die, paper, and another magic mat. My original bira cutting mat is worn out so the magic mat replaces it. Really like magic mats.
This review was written about a related product.
You must be signed in to comment. Please click here to sign in.
Will you have a mat that is compatible with the larger Spellbinders platform 8.5' x 12?
By:
lamariposa20
(10-Mar-21)
The magic mat plus 9x15 is compatible with the big Spellbinders Platinum. It barely fits width-wise and the mat is about three inches longer than the platform but it works! I tried it and it doesn't get hung up, it slides smoothly. As long as you only use the portion of the mat that fits on the Spellbinders platform, it's golden.
By: luxmissus
(11-Jul-23)
I know that this is self-healing, but if you are doing a lot of die-cutting back to back will it leave marks on the paper? That's my main problem with plastic plates is that the cut lines leave indentations in my project.
By:
soul_shine_designs
(21-Nov-20)
I've never had any paper residue come off onto my next cutting. I made a lot of Christmas cards and if you might, turn it over. I have a long one for my Big Kick so I've just turned it around and after it warping in the Gemini, I also turned it over. I've cleaned mine by spritzing a little water and brushing with a toothbrush, then dry off with a cloth.
By: Crobi16196
(31-Dec-21)
Has anyone tried to use the magic mat with an Anna Griffin Empress die cutting machine. I've checked all the measurments and it seems like it would fit. Just wondering if anyone has actually used it in an Empress.
By:
Tracy F
(09-Mar-21)
So, here is what to know about plates for the empress... 3 sizzix big shot plates, 3 spellbinders platinum plates, or 3 magic mats work the same as the Empress set up. I know that 3 plates seems like a lot but, compared to the cost of 1 set of replacement Empress plates, using 3 "regular" plates is minimal.
Can you use two magic mats at one time instead of the plates?
By:
Ms Gs
(06-Nov-20)
Yes, we have tested this and it does work! We would encourage experimentation with your machine and craft supplies!
By: Scrapbook.com
(06-Nov-20)
I found that I can use it on the top of 3D embossing folder stack for my Spellbinders Scout, in place of the Scout adapter plate, to allow me to run some 3d folders that are a little thicker than Spellbinders ones ( specifically some sixxiz Tim Holtz 3d mini folders). It is just enough thinner than the adapter pad to give the perfect thickness to my stack.
By: alohasthurb
(31-Oct-24)
How do you clean the Magic Mat? I know it's self healing but there seems to be paper left in the cuts.
By:
AmyT123
(16-Mar-21)
I'm not sure if this will work or not, but I clean the areas on the Olfa cutting mat that I use for fabric with an eraser. It removes all of the fabric fibers that have gotten stuck in the mat. I have had the mat that I use with a rotary cutter for over 20 years and it is still in wonderful shape. An eraser might work with Magic Mat. It's certainly worth a try.
By: jsiettmann1
(05-Jul-21)
Will the big magic mat work in the big shot plus switch machine?
By:
gillovenden
(16-Jan-23)
How many people have used the magic mat on a full sized Gemini and what size did you use? 9x15
By:
sharonmesdag
(22-Jun-21)
My Gemini Junior plates are 6 inches wide will this one work in Junior?
By:
mafranks284
(11-Mar-21)
I bought a Gemini this summer. The top plate warped so badly the first time I used it. I kept using but it ended up to where it wouldn't even go through the machine. I straightened it a little by laying it in a cookie sheet and adding boiling water then sitting two cast iron pots on top. Still ruined so bought a new one. They come one to a pack, expensive to continue replacing. 
